Child Lock - Panasonic Viera TC-P50S20H Operating Instructions Manual

Menu Item
HDMI1 / 2 / 3
Input
Reset to Defaults
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset to
Defaults
Off Timer

Child Lock

ANT in
Favourites Edit Creates list of favourite channels (Digital TV mode) (p. 29)
Channel List
Auto Tuning
Manual Tuning Sets the TV channels manually (p. 30 and p. 31)
Update
Channel List
New Channel
Message
Signal
Condition
OSD Language Changes language for on screen displays (English / Português / Español)
Adjustments / Configurations (alternatives)
Select to fit the input signal (Digital / Analogue) (p. 51).
Digital : HDMI cable connection
Analogue : HDMI-DVI adaptor cable connection
●
HDMI input mode only
Press the OK button to reset settings of the present Mode, Balance,
Headphone Volume and Surround in the Sound Menu to the default.
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / On Green)
H & V : by the horizontal and vertical signals from your PC
On Green : Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Locks a channel / AV input to prevent access to it (p. 32)
Select Antenna input type (Cable / Antenna)
●
All tuning data will be erased.
Skips the unwanted channels or edits channels (p. 29 and p. 31)
Sets all Digital TV or Analogue TV channels automatically (p. 30 and p. 31)
Updates the channel list while keeping your settings (Digital TV mode)
(p. 30)
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (Off / On) (p. 30)
Checks the Digital TV signal condition (p. 30)
●
Set to the minimum level if noise occurs
25