Maintenance; Faqs - Panasonic Viera TC-P50S20H Operating Instructions Manual

Maintenance

First, remove the mains plug from the socket outlet.
For regular care:
Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt
or fingerprints.
For stubborn dirt:
Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water).
Then wring the cloth and wipe the surface. Finally, wipe away all the moisture.
●
Do not use a hard cloth or rub the surface too hard. This may cause scratches on the surface.
●
Take care not to subject the TV's surfaces to water or detergent. A liquid inside the TV could lead to
product failure.
●
Take care not to subject the surfaces to insect repellent, solvent, thinner, or other volatile substances.
This may degrade surface quality or cause peeling of the paint.
●
The surface of the display panel is specially treated and may be easily damaged. Take care not to
tap or scratch the surface with your fingernail or other hard objects.
●
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long
time. This may degrade surface quality.
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or
electrical shock.

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
White spots or shadow images (noise)
●
Check the position, direction, and
connection of the aerial.
Neither image nor sound is
produced
●
Is the TV in "AV mode"?
●
Is the mains lead plugged into the
socket outlet?
●
Is the TV turned On?
●
Check the Picture Menu (p. 23 and
p. 24) and volume.
●
Check all required cables and
connections are firmly in place.
An error message appears
●
Follow the messages instructions.
●
If the problem persists, contact your
local Panasonic dealer.
Display panel, Cabinet, Pedestal
Mains plug
"VIERA Link" function does not work
and an error message appears
●
Confirm the connection. (p. 44)
●
Turn the connected equipment on and then switch
the TV on. (p. 44)
Permanently lit spots on screen
●
Due to production process involved in this
technology this may result in some pixels which are
permanently lit or unlit. This is not a malfunction.
Contrast is reduced
●
Contrast is lowered in the following conditions
without any user operation for a few minutes:
• no signal in Digital TV mode or AV mode
• selected locked channel
• selected invalid channel
• selected radio channel
• displayed menu
• Thumbnail or still picture
53