Table of Contents
Advertisement
Menu
Panel
Reset
to Defaults
Mode
Bass
Treble
Equalizer
Balance
Headphone Volume Adjusts the volume of the headphones
Surround
Volume Correction Adjusts the volume of individual channel or input mode
Speaker Distance
to Wall
Audio Preference
24
Item
Turns the screen off when you select "Off" (Off / On)
●
The sound is active even if the screen turns off.
●
Press any buttons to turn the screen on.
●
This function is effective in reducing power consumption when listening
to a sound without watching the TV screen.
R-Gain,
Adjusts each gain
G-Gain,
B-Gain
R-Cutoff,
G-Cutoff,
Cuts off each area
B-Cutoff
Changes the gamma curve (S Curve / 1.8 / 2.0 / 2.2 / 2.4 / 2.6)
Gamma
●
Please note the numerical values are reference for the adjustment.
Reset to
Press the OK button to reset the Advanced PC Settings to the default.
Defaults
Press the OK button to reset the present Picture Viewing Mode of the
selected input to the default settings.
Selects basic sound mode (Music / Speech / User)
●
The selected mode affects all input signals.
Music : Improves sound quality for watching music videos, etc.
Speech : Improves sound quality for watching news, drama, etc.
●
User
: Adjusts the sounds manually by using the equalizer to suit your
favourite sound quality.
●
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
●
This function is available when "Mode" is set to "User".
●
Select the frequency and change the frequency level by using the cursor
button.
●
If you want to enhance the bass sound, raise the level of the lower
frequency. If you want to enhance the treble sound, raise the level of the
higher frequency.
●
To reset the levels of each frequency to the default settings, select
the "Reset to Defaults" by using cursor button, and then press the OK
button.
Adjusts the volume level of right and left speakers
Surround sound settings (Off / V-Audio / V-Audio Surround)
V-Audio
V-Audio Surround : Provides a dynamic enhancer of width and depth to
●
Switching is also possible by the Surround button on the remote control (p. 10).
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
●
If the back space between the TV and wall is over 30 cm, "Over 30cm"
is recommended.
●
If the back space between the TV and wall is within 30 cm, "Up to
30cm" is recommended.
Selects the initial setting for audio tracks (Auto / MPEG)
Auto
: Automatically selects the audio tracks if programme has more
than two tracks.
The priority is given in the following order - Dolby Digital, MPEG.
MPEG : The priority is given to MPEG as long as the programme contains
MPEG audio.
●
Dolby Digital is the method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can be multi-
channel audio.
●
MPEG is an audio compression method that compresses audio to the
smaller size without any considerable loss of audio quality.
●
Digital TV mode only
Adjustments / Configurations (alternatives)
In Music and Speech modes, you can adjust "Bass" and "Treble"
settings, and those settings will be stored for each mode.
For the User mode, "Equalizer" will appear on the Sound Menu
instead of "Bass" and "Treble". Select the "Equalizer" and adjust
the frequency. "Equalizer" (below)
: Provides a dynamic enhancer to simulate improved
spatial effects
simulate improved spatial effects
Advertisement
Table of Contents
