1.2.2. Pool Configuration
This section describes how to configure the address pool for the wireless clients.
1. Select Pool Configuration in the Navigation tree.
2. Select create and specify the following settings:
a. Pool Name – GuestPool
b. Type of Binding - Dynamic
c. Network Number – 10.0.0.0
d. Network Mask - 255.0.0.0
e. Days - 1 day
f.
Hours - 0
g. Minutes - 0
h. Default Router Addresses – 10.90.90.90
1.3. ACL Configuration
The ACL in this scenario prevents wireless clients from accessing the web management
interface of the switch. All other types of traffic is allowed.
1. From the LAN menu, navigate to the Access Control Lists > IP ACL > Access
Profile Settings page.
2. From the IP ACL field, select Create New Extended ACL from the drop-down
menu.
3. Enter 100 in the ACL ID field, then click Submit.
4. From the Rule Configuration page, enter 1 as the Rule ID, Deny as the Action, and
False for Match Every, then click Submit.
5. The screen refreshes with additional fields. Click the Configure button associated
with the appropriate fields and enter the following criteria to deny HTTP traffic from
clients on the Guest Network to the Switch and APs: