VLAN Port Status
2.1.2. Configure VLAN Routing
To configure the VLAN routing interfaces for AP1, AP2, and the two D-LINK-NET networks,
use the following steps.
1. Select the LAN tab from the navigation panel and click L3 Features
Configuration.
2. Enter the VLAN ID for VLAN 20 in the VLAN ID field and select Create to create a
VLAN routing interface for VLAN 20.
This creates a logical routing interface with the slot/port designation of 4/1 for VLAN 20.
3. Repeat the previous step to create the VLAN routing interfaces for VLAN 30, 100, and
200 (shown below).
4. Navigate to L3 Features
5. Select interface 4/1 from the Slot/Port drop-down menu and enter the following
information:
a. IP Address: 192.168.20.254
IP
Interface Configuration.
VLAN Routing