Scenario 1 - Basic L2 Edge Setup: 1 Ws + 2 Aps - D-Link DWL-3500AP Configuration Manual

1. Scenario 1 - Basic L2 Edge Setup: 1 WS + 2 APs

The diagram in this scenario shows a very basic L2 edge network configuration with one
wireless switch and two access points. All devices are in the same L2 domain.
The objectives in this setup are as follows:
• Set up the minimum configuration for multiple APs
• Configure an AP with a static IP
• Configure an ACL to prevent wireless clients from accessing the WS1
management interface.
• Configure DHCP on the wireless switch for wireless client address assignment.
• Understand some of the D-LINK Unified Access Point features.
10.90.90.90/8
SSID:
Guest Network
Seamless Roaming
CL1
An overview of the configuration steps needed for Wireless Switch and APs are as follows:
1. Disable DHCP on the APs and assign a static IP address to AP2.
2. Configure the WS1 DHCP server & address pool for Guest Network clients.
3. Configure an ACL to restrict access from clients on the Guest Network.
4. Attach the APs to WS1.
5. Validate the failed APs to add them to the Valid AP database.
6. Save the configuration.
7. Perform tests.
WS1
AP1
10.90.90.91/8
SSID:
Guest Network
AP2
10.90.90.92/8