Do you have a question about the 1097 and is the answer not in the manual?
Questions and answers
Mehmet Ali Talat
March 30, 2025
EE appears but in meantime pump does not work.
2 comments:
Mr. Anderson
March 30, 2025
The "EE" error on the Lumiscope 1097 nebulizer usually indicates a malfunction or error in the compressor or internal components.
Possible Causes: 1. Overheating of the compressor. 2. Internal electrical fault. 3. Blockage or damage in tubing or nebulizer cup. 4. Power supply issue.
Steps to Fix the Pump: 1. Turn off the device and unplug it from the power source. 2. Allow it to cool down if it was running for a long time. 3. Check all connections – ensure tubing and nebulizer cup are properly connected and not blocked. 4. Inspect the power cord and plug for damage. 5. Restart the device after waiting a few minutes.
If the "EE" error continues: - The unit may require professional repair or replacement, as the error may indicate an internal fault that cannot be fixed by the user.
Note: Do not attempt to open or repair the internal parts yourself, as it may void the warranty or cause injury.
This answer is automatically generated
Mehmet Ali
April 1, 2025
@Mr. Anderson When I changed batteries it appears to work properly. Thanks.
Need help?
Do you have a question about the 1097 and is the answer not in the manual?
Questions and answers
EE appears but in meantime pump does not work.
The "EE" error on the Lumiscope 1097 nebulizer usually indicates a malfunction or error in the compressor or internal components.
Possible Causes:
1. Overheating of the compressor.
2. Internal electrical fault.
3. Blockage or damage in tubing or nebulizer cup.
4. Power supply issue.
Steps to Fix the Pump:
1. Turn off the device and unplug it from the power source.
2. Allow it to cool down if it was running for a long time.
3. Check all connections – ensure tubing and nebulizer cup are properly connected and not blocked.
4. Inspect the power cord and plug for damage.
5. Restart the device after waiting a few minutes.
If the "EE" error continues:
- The unit may require professional repair or replacement, as the error may indicate an internal fault that cannot be fixed by the user.
Note: Do not attempt to open or repair the internal parts yourself, as it may void the warranty or cause injury.
This answer is automatically generated
@Mr. Anderson When I changed batteries it appears to work properly. Thanks.