Battery Installation/Replacement • To use the unit, you must install batteries. • Open battery cover as illustrated. Install or replace two new batteries, making sure the polarities (+ and -) on the battery match the polarities on the case. • Replace battery cover. •...
Measurement NOTE: Unit measures on inflation. • To start the measurement Press the “Power/Start” switch. • The heart symbol will flash and the buzzer will sound for 1 second. When the unit completes the preparations for measurement, the buzzer will sound three more times.
played one above the other. • Unless an error is generated, the measurement results are automatically stored in memory (Up to 7 sets of results can be stored ). When there are already 7 sets of results in memory, the oldest one is automatically erased and overwritten with the newest.
Memory Recall • You can recall stored data by pressing the “Memory Recall” switch at any time, EXCEPT while taking a measurement. • Up to 7 sets of measurement results can be stored in memory. Memory cell No. 1 is always used to store the newest set of results.
Repeat the measure- The arm moved during ment without moving measurement. the arm. There is a problem with Return to Lumiscope Service Department. the unit. Repeat the measure- Pulse could not be ment without moving measured. the arm.
Specifications Model No. 1092 Oscillometric Method Measuring Principle Left Wrist Measurement Localization Soft Cuff Cuff Wrist Circumference Range 5.4 to 7.8 in. (13.5 to 19.5cm) Pressure Measurement 0 to 280 mmHg Pulse 40 to 180 Pulses/min. Range Pressure ±3 mmHg...