Yamaha DM2000-v2 Short Cut List page 4

5. Copy STEREO Mix to an AUX
Press and hold an INPUT FADER LAYER switch, then press an AUX SELECT
switch, and click YES in the confirmation box on the LCD. This copies the fader
levels to the selected AUX sends. Make sure the Aux sends are all PRE by clicking
the GLOBAL PRE switch on the SEND1-24 page in the AUX DISPLAY menu.
NOTE
Repeat the same procedure for each fader layer to copy the whole mix to
the Aux sends, as only one layer is copied at a time.
TIP
This is useful for making a quick headphone mix in a recording session
(where AUX 11 and 12 can be sent directly to the STUDIO MONITOR
OUT), or making a quick stage-monitor mix for a guest musician at a live
performance.
6. GEQ edit on Faders
In the GEQ EDIT page (EFFECTS/PLUG-INS menu), click one of the FADER
ASSIGN switches to access the GEQ bands on the faders. When you navigate
away from this page, the faders return to their normal mode, but the cursor position
is remembered, so next time the GEQ EDIT page is accessed, you only need to
press ENTER to get fader control.
7. SCENE FADE TIME Copy
To assign the same fader time to all channels in a scene, first enter the required
FADE TIME for one channel, then double-click ENTER to copy the time to all the
other input or output channels.