Panasonic KX-TG6071 Quick Manual page 8

TG607x_QG(e).fm Page 8 Tuesday, December 5, 2006 2:55 PM
Quick troubleshooting
3 No dial tone is heard from handset.
Lift up the handset from the base unit or
charger.
Press {C} (TALK) at the handset, then
check if the display shows "Talk".
link
"No
Move
5
No link to base.
base,
Move closer to
base, try again.
displayed.
Try remedy for
2 on previous
page.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
to base.
closer to
try again." is
Press {s} (SP-PHONE),
then check if the dial tone
is heard from the speaker
on the back.
No dial tone
Check the telephone
cord is properly
connected to both the
base unit and
telephone line jack on
the wall.
Still no dial tone
– 8 –
{C}
"Talk" is
5
Talk
displayed.
MuteL
KSlow
{s}
Dial tone is
heard.
Your telephone
may need service
when only back
speaker provides
a dial tone.