Panasonic KX-TG6071 Quick Manual page 7

TG607x_QG(e).fm Page 7 Tuesday, December 5, 2006 2:55 PM
Quick troubleshooting
2 Handset shows:
"No link to base. Move closer to base, try again."
Place the handset on the base unit, then
check if "Charging" is displayed.
"Charging" is not displayed.
Unplug and then plug AC
adaptor properly to both the
base unit and AC outlet.
"Charging" is still not
displayed.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor and
insert the battery into the handset again. Try re-registration
as explained later in this guide.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
"Charging" is
displayed.
"Charging" is
displayed, now.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
Re-registration failed.
Re-registration failed.
– 7 –