Panasonic KX-TG8202C Operating Instructions Manual page 47

TG8202C_TG8231C_8232C(e).book Page 47 Friday, July 27, 2007 4:48 PM
Problem
I cannot page the handset.
Call Display
Problem
The handset does not
display the caller's name
and/or phone number.
I cannot dial the phone
number edited in the caller
list.
Useful Information
Cause/solution
L The called handset is too far from the base unit.
L The called handset is in use. Try again later.
Cause/solution
L You have not subscribed to Call Display service.
Contact your service provider/telephone
company to subscribe.
L If your unit is connected to any additional
telephone equipment such as a Call Display box
or cordless telephone line jack, disconnect the
unit from the equipment and plug the unit
directly into the wall jack.
L If your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
L The name display service may not be available
in some areas. Contact your service provider/
telephone company for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
L The caller requested not to send caller
information (page 24).
L If a call is being transferred to you, the caller
information is not displayed.
L Generally, caller information is displayed from
the 2nd ring.
L The phone number you dialed might have been
edited incorrectly (for example, the long
distance "1" or the area code is missing). Edit
the phone number with another pattern (page
25).
47