Table of Contents
Advertisement
TG8202C_TG8231C_8232C(e).book Page 24 Friday, July 27, 2007 4:48 PM
Call Display Service
Using Call Display
service
Important:
L This unit is Call Display compatible.
To use Call Display features, you
must subscribe to Call Display
service. Consult your service
provider/telephone company for
details.
Call Display features
When an outside call is being received,
the calling party's name and phone
number are displayed.
Caller information for the last 50 callers
is logged in the caller list by the most
recent call to the oldest.
L Generally caller information is
displayed from the 2nd ring.
L If the unit cannot receive caller
information, the following is
displayed:
– "Unavailable Name & No.":
The caller dialed from an area
which does not provide Call Display
service.
– "Private caller": The caller
requested not to send caller
information.
– "Long distance": The caller
called you long distance.
L If the unit is connected to a PBX
system, caller information may not be
received properly. Consult your PBX
supplier.
Missed calls
If a call is not answered, the unit treats
the call as a missed call. The display
shows "missed call". This lets you
know if you should view the caller list to
see who called while you were out.
24
Custom name display
When the Call Display number is
received and it matches a phone
number stored in the phonebook, the
stored name from the phonebook is
displayed and logged in the caller list.
Visual Call Waiting service
If you subscribe to both Call Display and
Visual Call Waiting services, the 2nd
caller's information is displayed after
you hear a Call Waiting tone.
Press {CALL WAIT} to answer the 2nd
call.
L To switch between calls, press
{CALL WAIT}.
Note:
L Please contact your service provider/
telephone company for details and
availability of this service in your area.
Group settings for handset
phonebook
Group settings can help you identify
who is calling by using different ringer
tones and display colours for different
groups of callers. When adding an entry
to the handset phonebook you can
assign it to desired group (page 20).
When a call is received from a caller
assigned to a group, the group's display
colours and ringer tone you selected
are used.
Changing group ringer tones
If you select "No ringer ID", the unit
will use the external ringer tone you set
on page 28 when calls from this group
are received. The default is "No
ringer ID".
1
{C} (left soft key) i {MENU}
2
{V}/{^}: "Group" i {SELECT}
Advertisement
Table of Contents
