Advertisement
Jelly Jewel LED
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
Jelly Jewel LED
•
Keep the outside of this device dry at all times. Do not spill water
or other liquids into or on to your unit. To prevent fire or shock
hazard, do not expose this product to rain or moisture.
•
Be sure to save the packing carton in the event you may have to
return the unit for service.
•
This unit is designed for interior use only. Do not use this unit out
doors. Use of product outdoors will void the warranty.
•
Be sure that the local power outlet match that of the required vol-
tage for your unit.
•
Do not attempt to operate this unit if the power cord has been
frayed or broken.
•
Always route your power cord out of the way of foot traffic.
•
Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in the rare case of an internal short.
•
Disconnect the unit's main power when left unused for long peri-
ods of time.
•
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6" (15cm) between this device and a wall.
•
Never block the ventilation holes.
•
Do not attempt to operate this unit, if it becomes damaged in any
way.
•
Never operate this unit when it's cover is removed.
•
This unit is for adult use only. Keep out of the reach of children.
American DJ Supply
- www.americandj.com - Jelly Jewel LED Instruction Manual Page 3
©
®
General Instructions
Precautions
Jelly Jewel LED
The Jelly Jewel LED carries a 2 year (730 Day) limited warranty. We
recommend you fill out the enclosed warranty card to validate your
purchase. All returned service items whether under warranty or not,
must be freight pre-paid and accompany a return authorization (R.A.)
number. If the unit is under warranty, you must provide a copy of
your proof of purchase invoice. Please contact American DJ
tomer support for a R.A. number.
Jelly Jewel LED
Introduction: Thank you for purchasing the Jelly Jewel LED by
American DJ
. This unit includes a hanging bracket and may be hung
®
or set on a flat surface. For best results, use a fog or haze machine
to enhance the beam output. Please read the following instructions
before installing or operating your new Jelly Jewel LED.
Operating Instructions: Plug the unit in to a matching power outlet
or into a power pack. Light output will be immediate when the unit is
powered on. The unit must receive a sound source to operate nor-
mally.
Mounting: When used with included mounting bracket, this unit may
be mounted in any safe position or set on a flat stable surface.
Caution! Be sure not to obstruct cooling vents and keep this unit in a
well ventilated area. Never open the unit while in use.
American DJ Supply
- www.americandj.com - Jelly Jewel LED Instruction Manual Page 4
©
®
Warranty Registration
cus-
®
Operation
Advertisement
