Chapter 6: Using The Tv's Features; Selecting The Video Input Source To View - Toshiba 40XV648U Owner's Manual

Selecting the video input source
to view
To select the video input source to view:
1
Press + on the remote control or TV control panel.
2
And then either:
a) Press 0–8; or
b) Repeatedly press B or b on the remote control
and then press T to change the input; or
c) Repeatedly press + on the remote control or
TV control panel to change the input.
Inputs
0 ANT/CABLE ANT/CABLE
Video 1
1
Video 2
2
ColorStream HD1
3
ColorStream HD2
4
HDMI 1
5
HDMI 2
6
HDMI 3
7
PC
8
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- "Labeling video input sources" on page 29).
• Sources can also be skipped (- "Setting video input
skip" on page 29).
• Inputs that are set to skip will be grayed out and will be
skipped over only when selecting inputs by repeatedly
pressing +.
• If one or more REGZA-LINK
an HDMI input, the REGZA-LINK
this case, the label (- page 29) will not appear in the
input selector.
32
XV648U_09C06.pdf 1

Chapter 6: Using the TV's features

REGZA-LINK
® devices are connected to
® icon will appear. In
®
To select a REGZA-LINK device:
1
Press B or b to highlight an appropriate HDMI
input.
2
Press c to display the list of REGZA-LINK
for that input.
3
If there are multiple REGZA-LINK
input, use B or b to highlight a particular device.
4
Press T to select the device and change inputs.
® devices
® devices on the
2009/07/10 11:25:46