Learning About The Remote Control - Toshiba 40XV648U Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are
described here. For the REGZA-LINK remote control
functions, see the section "Using REGZA-LINK
page 49). For a complete list of the remote control's
functions, see the remote control functional key chart
(- page 22).
Note: The error message "Not Available" may appear if
you press a key for a function that is not available.
20
XV648U_06C03.pdf 2
Chapter 3: Using the remote control
POWER turns the TV on and off. When the TV is on,
1
the green LED indicator on the TV front will be
illuminated.
FREEZE freezes the picture. Press again to restore
2
the moving picture (- page 38).
SLEEP accesses the sleep timer (- page 48).
® " (-
3
PIC SIZE cycles through the picture sizes
4
(- page 36).
Channel Numbers (0–9, –/100) directly tune
5
channels. The = button is used to enter two part
channel numbers (- page 35) or to edit the
Favorites List (- page 33).
INPUT selects the video input source
6
(- page 32).
CH Bb cycles through programmed channels when
7
no menu is on-screen (- page 35).
VOL + – adjusts the volume level.
8
FAV BROWSER accesses the Favorites List in the
9
Channel Browser™ (- page 33).
10 RECALL displays TV status information
(- page 52).
11 CH RTN returns to the last viewed channel or
source (- page 35).
12 MUTE reduces or turns off the sound
(- page 42).
13 INFO displays TV status information as well as
program details, when available (- page 52).
14 3 C / # c While watching TV, these buttons open
the Channel Browser™ and tune to the previous/
next channel in the channel history (- page 34).
15 Arrow buttons (BbC c) When a menu is on-screen,
these buttons select or adjust programming menus.
16 ENTER activates highlighted items in the main menu
system.
17 MENU accesses the main TV menu system
(- page 26).
18 EXIT closes on-screen menus.
19 MODE SELECT switch selects between TV,
CABLE/SAT, AUX1, and AUX2 modes.
Set to "TV" to control the TV.
2009/07/10 11:00:10