Table of Contents
Advertisement
CSD-TD10/TD30
PRECAUTION
1. Clean the following parts with a denatured-alcohol-moistened
swab :
record/playback head
erase head
capstan
2. Demagnetize the record/playback head with a head demagne-
tizer. (Do not bring the head magnetizer close to the erase head.)
3. Do not use a magnetized screwdriver for the adjustments.
4. The adjustments should be performed with the rated power
supply voltage (9V) unless otherwise noted.
Torque Measurement
Mode
Torque meter
FWD
CQ-102C
FWD
CQ-102C
Back Tension
FF
CQ-201B
REW
CQ-201B
Tape Tension Measurement
Mode
Tension meter
FWD
CQ-403A
12
SECTION 4
MECHANICAL ADJUSTMENTS
pinch roller
rubber belts
idlers
Meter reading
2.95 – 6.86 mN • m
(30 – 70 g • cm)
(0.42 – 0.97 oz • inch)
0.15 – 0.53 mN • m
(1.5 – 5.5 g • cm)
(0.021 – 0.076 oz • inch)
more than 5.88 mN • m
(more than 60 g • cm)
(more than 0.83 oz • inch)
more than 5.88 mN • m
(more than 60 g • cm)
(more than 0.83 oz • inch)
Meter Reading
more than 100 g
(more than 3.53 oz)
Advertisement
Table of Contents
