Sony CSD-MP100 Service Manual

Cd stereo radio cassette recorder

Advertisement

Quick Links

SERVICE MANUAL
Ver 1.0 2003. 06
AUDIO POWER SPECIFICATIONS (US model)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 8-ohm loads, both channels driven from
150 - 6,300 Hz; rated 1.5 W per channel-
minimum RMS power, with no more than 10%
total harmonic distortion in AC operation.
Other Specifications
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Sony Corporation
9-877-441-01
2003F04-1
Personal Audio Company
© 2003. 06
Published by Sony Engineering Corporation
CSD-MP100
Model Name Using Similar Mechanism CFD-S200
CD
CD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism NEW
TC
Section Tape Transport Mechanism Type
SPECIFICATIONS
Radio section
Frequency range
FM: 87.5 - 108 MHz
US, CND model:
AM: 530 - 1,710 kHz
TW, AUS, KR model:
AM: 531 - 1,611 kHz
AEP, UK, E4, E15, SP model:
AM: 531 - 1,611 kHz (9 kHz step)
530 - 1,610 kHz (10 kHz step)
Antennas
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 sec. with Sony cassette C-60
Frequency response
TYPE I (normal): 80 - 10,000 Hz
CD STEREO RADIO CASSETTE RECORDER
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
KSM-213RDP
KSS-213R
MF-MP100
– Continued on next page –
1

Advertisement

Table of Contents
loading

Summary of Contents for Sony CSD-MP100

  • Page 1 Emission duration: Continuous Fast winding time Laser output: Less than 44.6 µW Approx. 120 sec. with Sony cassette C-60 (This output is the value measured at a distance of Frequency response about 200 mm from the objective lens surface on TYPE I (normal): 80 - 10,000 Hz the optical pick-up block with 7 mm aperture.)
  • Page 2 LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
  • Page 3 CSD-MP100 Notes for saving files on the media About “MP3” When the disc is inserted, the player reads all the files on that disc. If there are many folders or non-MP3 files on the disc, it may take a What is the MP3 long time for play to begin or for the next MP3 file to start play.
  • Page 4: Table Of Contents

    CSD-MP100 TABLE OF CONTENTS 1. SERVICING NOTES ............5 2. GENERAL ................6 3. DISASSEMBLY 3-1. Cabinet Rear Assy ............... 9 3-2. Chassis CD Assy ..............9 3-3. Main Board, Tape Board ........... 10 3-4. Tape Mechanism Deck ............10 3-5.
  • Page 5: Servicing Notes

    CSD-MP100 SECTION 1 SERVICING NOTES PRECAUTION TO REPLACE OPTICAL BLOCK CHUCK PLATE JIG ON REPAIRING (KSM-213RDP) On repairing CD section, playing a disc without the lid (CD), use Chuck Plate Jig. Body or clothes electrostatic potential could ruin laser diode •...
  • Page 6: General

    CSD-MP100 SECTION 2 GENERAL This section is extracted from instruction manual. PAUSE STOP/EJECT PLAY...
  • Page 7 CSD-MP100...
  • Page 8: Disassembly

    CSD-MP100 SECTION 3 DISASSEMBLY • The equipment can be removed using the following procedure. 3-1. CABINET REAR ASSY (Page 9) 3-2. CHASSIS CD ASSY 3-10. TUNER BOARD 3-11. POWER TRANS BOARD (Page 9) (Page 13) (Page 14) 3-3. MAIN BOARD, 3-7.
  • Page 9: Cabinet Rear Assy

    CSD-MP100 Note : Follow the disassembly procedure in the numerical order given. 3-1. CABINET REAR ASSY 4 two screws 2 cover (BATT) 1 knob RTRY VOL BVTP 3 x 25 3 two screws BVTP 3 x 10 7 CN101 5 three screws...
  • Page 10: Main Board, Tape Board

    CSD-MP100 3-3. MAIN BOARD, TAPE BOARD 4 CN603 6 screw (flat type) BVTP 3 x 10 2 CN302 3 CN601 1 CN201 (flat type) 9 two screws BVTP 2.6 x 10 qs two holders (PWB) 5 CN602 (flat type) 8 CN301 0 Removal the solders.
  • Page 11: Cassette Lid Assy

    CSD-MP100 3-5. CASSETTE LID ASSY 1 screw 2 damper BVTP 2.6 x 10 3 cassette lid assy cabinet front assy 4 cassette spring T 3-6. DISPLAY BOARD 2 three screws KTP 3 x 10 1 three screws KTP 3 x 10...
  • Page 12: Cd Block Assy

    CSD-MP100 3-7. CD BLOCK ASSY chassis CD assy two claws 3 CD cover 4 two vibration proof rubbers two claws 5 two vibration proof rubbers 2 two screws 2.6 x 10 6 CD block assy 1 two screws 2.6 x 10 3-8.
  • Page 13: Optical Pick-Up

    CSD-MP100 3-9. OPTICAL PICK-UP 6 optical pick-up 5 sled shaft claw 1 gear (A) 2 screw PWB tapping (M2) 3 screw PWB tapping (M2) 3-10. TUNER BOARD 2 telescopic antenna 1 screw B 2.6 x 10 holder (PWB TU) 3 screw...
  • Page 14: Power Trans Board

    CSD-MP100 3-11. POWER TRANS BOARD 1 CN102 2 CN103 4 transformer shield 6 POWER TRANS board 5 two screws (screw (2.6)) 3 four screws BVTP 3 x 20 3-12. HRP301, HE301, PINCH ROLLER ARM ASSY 5 screw 3 screw (azimuth)
  • Page 15: M301, Belt

    CSD-MP100 3-13. M301, BELT 5 two screws (motor coller) motor bracket 3 RF belt 6 M301 (sub motor assy) 4 main belt 1 screw (MB)
  • Page 16: Mechanical Adjustments

    CSD-MP100 SECTION 4 SECTION 5 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS PRECAUTION TAPE SECTION 0 dB = 0.775 V 1. Clean the following parts with a denatured-alcohol-moistened swab : • Standard Output Level record/playback head pinch roller Output terminal SPEAKER L-CH (SP301)
  • Page 17: Tuner Section

    CSD-MP100 TUNER SECTION 0 dB = 1 µV FM IF ADJUSTMENT • FM Section Adjust for a maximum reading on level meter. Setting: BAND button: FM 10.7 MHz FM RF signal generator FM FREQUENCY COVERAGE TP (FM IN) ADJUSTMENT 0.01 µ F Frequency Display 87.5 MHz...
  • Page 18: Cd Section

    CSD-MP100 Adjustment Location: CT3, L3 TRACKING ADJUSTMENT – MAIN board (component side) – TP (VT) (CONDUCTOR SIDE) CT1, L1 TP (FM IN) TRACKING (CONDUCTOR SIDE) ADJUSTMENT ADJUSTMENT FREQUENCY COVERAGE ADJUSTMENT ADJUSTMENT FREQUENCY COVERAGE ADJUSTMENT CD SECTION CD section adjustments are done automatically in this set.
  • Page 19: Diagrams

    CSD-MP100 SECTION 6 DIAGRAMS 6-1. IC PIN DESCRIPTIONS • IC1001 LC78684E (MP3 DECODER, CD-ROM DECODER, ANTI-SHOCK CONTROLLER) (CD/MP3 BOARD) Pin No. Pin Name Pin Description LRSY CD L/R clock input ADDATA Audio data output ADBCK Audio bit clock output ADLRCK...
  • Page 20 CSD-MP100 Pin No. Pin Name Pin Description Data connecting point detection completion flag output (at CD-DA, H: active)/DRAM CNTOK data serial output (at CD-ROM, H: active) (Not used. (Open)) DRAM write discontinue flag output (at CD-DA, H: active)/DRAM data transfer clock output (at CD-ROM, H: active) (Not used.
  • Page 21 CSD-MP100 • IC601 LC877480B-51F5-E (SYSTEM CONTROL) (MAIN BOARD) Pin No. Pin Name Pin Description CQ-WRQ CD write request data input MP3-INTB MP3 interrupt signal iput CD-DO CD data output CD-DI CD data input CD-CL CD clock output MP3-CMDOUT MP3 command serial data output...
  • Page 22 CSD-MP100 Pin No. Pin Name Pin Description SEG9 LCD segment data output SEG10 LCD segment data output SEG11 LCD segment data output SEG12 LCD segment data output SEG13 LCD segment data output SEG14 LCD segment data output SEG15 LCD segment data output...
  • Page 23: Block Diagram - Cd Section

    CSD-MP100 6-2. BLOCK DIAGRAM — CD SECTION — LCHO (Page 24) INTERPOLATION CD L CH SLICE ERROR MUTE DIGITAL FIN2 EFMIN LEVEL CORRECTION & FILTER CONTROL AUDIO CD ATTENUATION & RCHO R-CH DEEMPHASIS 1-bit DAC PH/BH DATA DATA IN FIN1...
  • Page 24: Block Diagram - Main Section

    CSD-MP100 6-3. BLOCK DIAGRAM — MAIN SECTION — S301G S301I CD L CH (Page 23) S101C HRP301 RECORD/PLAYBACK HEAD TAPE RADIO S301F RV201 POWER AMP VOLUME IC201 LINE SP301 R-CH SPEAKER Q205 Q201 (L-CH) REC/PB PREAMP IC301 Q203 SP302 R-CH...
  • Page 25: Circuit Boards Location

    CSD-MP100 6-4. CIRCUIT BOARDS LOCATION • Waveforms • Waveform (Mode: PLAY) — CD/MP3 Board — — TUNER Board — 0.5V/div 5µsec/div 500mV/div 0.5µsec/div 1.5Vp-p 0.85±0.2Vp-p 75kHz POWER TRANS board IC701 (RF) (XOUT) SELECTOR board (E4, E15 model) 100mV/div 200µsec/div MAIN board 1.8V...
  • Page 26: Printed Wiring Board - Cd Section

    CSD-MP100 • Refer to page 25 for Circuit Boards Location. 6-5. PRINTED WIRING BOARD — CD SECTION — • Refer to page 26 for Common Note on Printed Wiring Boards. THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
  • Page 27 CSD-MP100 (Page 31) • Semiconductor Location Ref. No. Location IC701 IC702 IC1001 IC1002 D-10 IC1003 Q701...
  • Page 28: Schematic Diagram - Cd Section

    CSD-MP100 • Refer to page 25 for Waveforms. • Refer to page 26 for Common Note on Schematic Diagrams. 6-6. SCHEMATIC DIAGRAM — CD SECTION — • Refer to page 41 for IC Block Diagrams. C754 C709 R731 R728 R727...
  • Page 29: Printed Wiring Board - Tuner Section

    CSD-MP100 • Refer to page 25 for Circuit Boards Location. 6-7. PRINTED WIRING BOARD — TUNER SECTION — • Refer to page 26 for Common Note on Printed Wiring Boards. (Page 31) 1-688-455- (11) • Semiconductor Location Ref. No. Location...
  • Page 30: Schematic Diagram - Tuner Section

    CSD-MP100 • Refer to page 25 for Waveforms. • Refer to page 26 for Common Note on Schematic Diagrams. 6-8. SCHEMATIC DIAGRAM — TUNER SECTION — • Refer to page 42 for IC Block Diagrams. JC12 JC11 JC24 IC B/D...
  • Page 31: Printed Wiring Board - Main Section

    CSD-MP100 • Refer to page 25 for Circuit Boards Location. 6-9. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 26 for Common Note on Printed Wiring Boards. (Page 36) (Page 36) (Page 27) (Page 36) Except E4, E15...
  • Page 32: Schematic Diagram - Main Section (1/2)

    CSD-MP100 • Refer to page 25 for Waveforms. 6-10. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 26 for Common Note on Schematic Diagrams. (Page 37) (Page 37) (Page 37) S601 CN601 CN602 CN603 CN604 R681 C667...
  • Page 33: Schematic Diagram - Main Section (2/2)

    CSD-MP100 • Refer to page 26 for Common Note on Schematic Diagrams. 6-11. SCHEMATIC DIAGRAM — MAIN SECTION (2/2) — • Refer to page 43 for IC Block Diagrams. D203 D201 R259 R258 IC B/D C239 Q209 R257 R256 C238...
  • Page 34: Printed Wiring Board - Tape Section

    CSD-MP100 • Refer to page 25 for Circuit Boards Location. 6-12. PRINTED WIRING BOARD — TAPE SECTION — • Refer to page 26 for Common Note on Printed Wiring Boards. R340 R334 C307 R304 R303 R339 C308 JW301 D302 C311...
  • Page 35: Schematic Diagram - Tape Section

    CSD-MP100 • Refer to page 26 for Common Note on Schematic Diagrams. 6-13. SCHEMATIC DIAGRAM — TAPE SECTION — • Refer to page 43 for IC Block Diagrams. IC B/D IC301 R304 C304 C393 R301 C394 C311 C306 R302 R303...
  • Page 36: Printed Wiring Board - Display Section

    CSD-MP100 • Refer to page 25 for Circuit Boards Location. 6-14. PRINTED WIRING BOARD — DISPLAY SECTION — • Refer to page 26 for Common Note on Printed Wiring Boards. (Page 31) (Page 31) (Page 31) R812 S804 S805 S803...
  • Page 37: Schematic Diagram - Display Section

    CSD-MP100 6-15. SCHEMATIC DIAGRAM — DISPLAY SECTION — • Refer to page 26 for Common Note on Schematic Diagrams. (Page 32) (Page 32) CNJ603 C801 CNJ602 R801 CNJ601 IC801 R802 (Page 32) R803 R804 R805 R806 R807 R808 R809 R810 R811...
  • Page 38: Printed Wiring Boards - Power Supply Section

    CSD-MP100 • Refer to page 25 for Circuit Boards Location. 6-16. PRINTED WIRING BOARDS — POWER SUPPLY SECTION — • Refer to page 26 for Common Note on Printed Wiring Boards. EXCEPT E4, E15 MODEL (Page 31)
  • Page 39 CSD-MP100 E4, E15 MODEL (Page 31)
  • Page 40: Schematic Diagram - Power Supply Section

    CSD-MP100 6-17. SCHEMATIC DIAGRAM — POWER SUPPLY SECTION — • Refer to page 26 for Common Note on Schematic Diagrams. CNA101 JW115 J101 C101 C113 JW102 C103 D101 D103 C105 (Page 33) JW101 C104 D102 D104 C106 S102 JW114 CNA104...
  • Page 41: Ic Block Diagrams

    CSD-MP100 6-18. IC BLOCK DIAGRAMS IC701 LC78646E (CD/MP3 Board) 78 77 76 75 74 73 72 71 69 68 67 66 65 64 63 62 61 FIN1 – FIN2 – TIN1 TBAL – – TIN2 – – TBAL – RFMON...
  • Page 42 CSD-MP100 IC702 BA5826FP-E2 (CD/MP3 Board) IC1 TA2149BN (TUNER Board) GND1 FM RF-OUT FM RF SP– D.BUFF VCC1 FM RF-IN SL– AM RF-IN D.BUFF AM LOW CUT LEVEL D.BUFF SHIFT MIX OUT FM OSC D.BUFF SPIN LEVEL SHIFT AM OSC BUFF...
  • Page 43 CSD-MP100 IC201 TA8227P (MAIN Board (2/2)) IC301 BA3308 (TAPE Board)
  • Page 44: Exploded Views

    CSD-MP100 SECTION 7 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Color Indication of Appearance Parts The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. Example : 0 are critical for safety.
  • Page 45: Cabinet Front (1) Section

    CSD-MP100 7-2. CABINET FRONT (1) SECTION not supplied 52 53 not supplied SP301 MF-MP100 not supplied not supplied not supplied not supplied SP302 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-248-392-21 KEY CASS PAUSE 3-248-397-21 KEY CASS REC 3-248-393-21 KEY CASS STOP 4-951-620-11 SCREW (2.6X10), +BVTP...
  • Page 46: Cabinet Front (2) Section

    CSD-MP100 7-3. CABINET FRONT (2) SECTION LCD801 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3382-875-1 SUB ASSY, CABINET FRONT (US) 1-827-029-11 CABLE, FLEXIBLE FLAT 5P X-3383-393-1 SUB ASSY, CABINET FRONT (EXCEPT US) 3-254-677-01 SHEET FFC...
  • Page 47: Chassis Cd Section

    CSD-MP100 7-4. CHASSIS CD SECTION S601 KSM-213RDP Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 151 A-3347-681-A CD/MP3 BOARD, COMPLETE 3-249-192-01 CHASSIS (CD) (US) 1-827-028-11 CABLE, FLEXIBLE FLAT (20 CORE) 3-249-192-11 CHASSIS (CD) (EXCEPT US) 3-916-006-01 SCREW (2.6X16)
  • Page 48: Cabinet Rear Section

    CSD-MP100 7-5. CABINET REAR SECTION ANT1 F101 T101 not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piéce...
  • Page 49: Tape Mechanism Section

    CSD-MP100 7-6. TAPE MECHANISM SECTION (MF-MP100) not supplied not supplied not supplied HE301 not supplied HRP301 not supplied not supplied M301 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3172-050-A MF-MP100 HE301 1-500-813-11 HEAD, ERASE (ERASE)
  • Page 50: Cd Mechanism Section

    CSD-MP100 7-7. CD MECHANISM SECTION (KSM-213RDP) M701 M702 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piéce...
  • Page 51: Electrical Parts List

    CSD-MP100 SECTION 8 BATT-1 BATT-2 ELECTRICAL PARTS LIST CD/MP3 NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by mark 0 or dotted line with mark the parts list may be different from the they are seldom required for routine service.
  • Page 52 CSD-MP100 CD/MP3 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > R732 1-216-809-11 METAL CHIP 1/10W R733 1-216-809-11 METAL CHIP 1/10W CNP701 1-779-553-21 CONNECTOR, FFC (LIF(NON-ZIF)) 16P R734 1-216-809-11 METAL CHIP 1/10W CNP702 1-784-742-11 CONNECTOR, FFC 20P...
  • Page 53 CSD-MP100 DISPLAY MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3347-537-A DISPLAY BOARD, COMPLETE A-3347-536-A MAIN BOARD, COMPLETE (US) A-3683-621-A MAIN BOARD, COMPLETE (CND) ************************ A-3683-622-A MAIN BOARD, COMPLETE (AEP,UK,E15,SP) 1-827-029-11 CABLE, FLEXIBLE FLAT 5P (CNJ601)
  • Page 54 CSD-MP100 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C233 1-126-960-11 ELECT < CONNECTOR > C234 1-162-966-11 CERAMIC CHIP 0.0022uF 10% C235 1-162-966-11 CERAMIC CHIP 0.0022uF 10% CN101 1-564-707-11 PIN, CONNECTOR (SMALL TYPE) 5P C236...
  • Page 55 CSD-MP100 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JC223 1-216-864-11 METAL CHIP 1/10W R117 1-216-829-11 METAL CHIP 4.7K 1/10W JC224 1-216-864-11 METAL CHIP 1/10W R121 1-249-413-11 CARBON 1/4W JC230 1-216-864-11 METAL CHIP 1/10W R125...
  • Page 56 CSD-MP100 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R250 1-216-821-11 METAL CHIP 1/10W R634 1-216-821-11 METAL CHIP 1/10W R251 1-216-821-11 METAL CHIP 1/10W R635 1-216-821-11 METAL CHIP 1/10W R252 1-216-833-11 METAL CHIP 1/10W R636...
  • Page 57 CSD-MP100 MAIN POWER SELECTOR TAPE Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R690 1-216-821-11 METAL CHIP 1/10W < FUSE > R691 1-216-821-11 METAL CHIP 1/10W 0 F101 R692 1-216-797-11 METAL CHIP 1/10W 1-533-469-11 FUSE, GLASS TUBE (DIA.5) (T2.5AL/250V)
  • Page 58 CSD-MP100 TAPE TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TRANSISTOR > 1-162-970-11 CERAMIC CHIP 0.01uF (EXCEPT US,CND) Q301 8-729-907-00 TRANSISTOR DTC114EU 1-164-227-11 CERAMIC CHIP 0.022uF Q302 8-729-036-89 TRANSISTOR KTC3198GR-A (US,CND) Q303 8-729-907-00 TRANSISTOR DTC114EU 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 59 CSD-MP100 TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TRIMMER > 1-216-815-11 METAL CHIP 1/10W 1-216-825-11 METAL CHIP 2.2K 1/10W 1-141-603-21 CAP, ADJ 1-216-825-11 METAL CHIP 2.2K 1/10W 1-141-601-21 CAP, ADJ 1-216-825-11 METAL CHIP 2.2K...
  • Page 60 CSD-MP100 Ref. No. Part No. Description Remark ACCESSORIES ************ 1-569-008-32 ADAPTOR, CONVERSION (E4) 1-696-819-11 CORD, POWER (AUS) 1-769-412-21 CORD, POWER (AEP,UK,E4,E15,SP) 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (UK) 1-776-985-11 CORD, POWER (KR) 1-783-878-11 CORD, POWER (US,CND) 1-791-210-12 CORD, POWER (TW) 3-251-417-11 MANUAL, INSTRUCTION (ENGLISH,SPANISH,...
  • Page 61 CSD-MP100 MEMO...
  • Page 62 CSD-MP100 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003. 06...

Table of Contents