Horizon Fitness e1100GS Owner's Manual page 12

ASSEMBLY Step 7
CONSOLE
CONSOLE MAST
NOTCH
TAB
NOTE: Be careful not to pinch any wires while attaching the console.
12
CONSOLE CABLES
UPPER HANDLEBAR
PRE-INSTALLED BOLTS
PRE-INSTALLED
SET SCREWS
LOWER HANDLEBAR
YOU ARE FINISHEd!
NOTE: There is no hardware bag for
this step. All hardware is pre-installed.
Open hardware bag 8.
A
Attach the conSole caBleS
B
to the conSole.
Carefully tuck the conSole
C
caBleS into the conSole
maSt before attaching the
conSole. Attach conSole
to conSole maSt using 4
BoltS (t).
Slide Upper HanDleBarS
d
onto loWer HanDleBarS
and align notcH with taB
making sure handlebars are
joined together completely.
Secure Upper HanDleBarS
to loWer HanDleBarS
using pre-attacHeD Set
ScreWS.
Repeat step d on other side.
E