Horizon Fitness e1100GS Owner's Manual page 10

ASSEMBLY Step 5
HarDWare BaG 5 CONTENTS :
FLAT WASHER (K)
20 mm
Qty: 2
FLAT WASHER (E)
17 mm
Qty: 2
FLAT WASHER (K)
SPRING WASHER (B)
BOLT (M)
PEDAL ARM BRACKET
10
BOLT (M)
SPRING WASHER (B)
15 mm 20 mm
Qty: 2
Qty: 4
NUT (J)
Qty: 2
Open hardware bag 5.
A
Slide lower link arm onto pedal arm
B
bracket.
TEFLON
WASHER (P)
28.4 mm
Qty: 4
Attach lower link arm to pedal arm
C
using 1 flat washer (k), 1 spring
BOLT (O)
70 mm
washer (b) and 1 bolt (m).
Qty: 2
Align opposite end of lower link arm with
d
bracket on bottom of lower handlebar.
Place teflon washers (p) on both sides of
E
the lower link arm. While holding teflon
washers (p) slide lower link arm into
bottom end of lower handlebar.
Secure the joint with 1 flat washer (e), 1
F
LOWER HANDLEBAR
spring washer (b),1 bolt (o) and secure
NUT (J)
with 1 nut (J).
FLAT WASHER (E)
SPRING WASHER (B)
Repeat steps B–F on the opposite side of the
G
BOLT (O)
elliptical.
TEFLON WASHERS (P)
LOWER LINK ARM