Advertisement
Brush cleaning
Squeeze the foil frame release
buttons and lift the foil frame upward
to remove it (see fig. 9). Remove
the inner blades one at a time by
grasping it firmly at both ends and
pulling it straight away from the
shaver. Clean the outer foils, the
shaver body and the trimmer with
the long brush (see fig. 10). Clean
the inner blades with the short brush
by moving it in the direction in fig.
11 (A). Do not move the brush in the
direction in fig. 11 (B), as it will
damage the inner blade, and its
cutting performance. Do not use the
short brush to clean the outer foils.
Replacing shaving head
components
It is recommended that you replace
the system outer foil at least once a
year and the inner blade at least
once every 2 years to maintain your
shaver's cutting performance.
Replacing the system outer foil
(see fig. 8)
Squeeze the system outer foil
release buttons and lift the system
outer foil upward to remove it. To
insert the new system outer foil,
press down until it snaps into place.
Replacing the inner blades
(see fig. 9)
Squeeze the system outer foil
release buttons and lift the foil frame
upward to remove it. Remove the
inner blade one at a time by grasping
it firmly at both ends and pulling
straight away from the shaver.
Do not touch the metal parts of
inner blades.
To insert the new inner blade, hold
the blade one at a time at both ends
and press downward until it snaps
into the shaver.
For environmental protec-
tion and recycling of
materials
This shaver contains a Litium-ion
battery.
Please make sure that the battery is
disposed of at an officially assigned
location, if there is one in your
country.
How to remove the built-in
rechargeable battery before
disposal of the shaver
(see fig. 12)
WARNING:
Do not attempt to replace the
battery for the purpose of reusing
the shaver. This could result in the
risk of fire or electric shock.
The battery in this shaver is not
intended to be replaced by con-
sumers. However, the battery may
be replaced at an authorized service
center. The procedure described
below is intended only for removal of
9
Advertisement
