Advertisement
Using the trimmer
(see fig. 6)
Slide the trimmer handle up to open
the trimmer.
Place the trimmer at a right angle to
your skin and move it downward to
trim sideburns.
Cleaning your shaver
(see fig. 7)
Warning – To prevent electric
shock or personal injury, discon-
nect the power cord from the
shaver before cleaning with water.
The following is the symbol of
washable shaver.
The symbol means that the
handheld part may be cleaned
under water.
For cleanliness and convenience,
we recommend that you clean your
shaver with water and a liquid hand
soap. Regular cleaning will keep
your shaver in good condition while
preventing odors or bacteria from
developing, and maintain the
cutting performance.
With the system outer foil in place,
apply some hand soap onto the
outer foil.
Push and hold the 0/1 switch for
more than 2 seconds to activate the
turbo mode for "sonic" vibration
cleaning.
At the same time, the lamps of the
Battery capacity monitor will flash
around randomly.
Pour some water over the outer foil.
After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pushing the 0/1 switch.
Remove the system outer foil and
push the 0/1 switch for more than 2
seconds to activate the turbo mode
for "sonic" vibration cleaning and
clean it with running water.
The "sonic" vibration cleaning does
not work while cord shaving.
Wipe off any moisture from the
shaver with a dry cloth and dry it
without the system outer foil.
Lubrication
(see fig. 13)
To maintain shaving comfort for a
long time, it is recommended that
the oil provided with the shaver is
used.
1. Switch off the shaver.
2. Apply one drop of oil to each of
the outer foils.
3. Raise the trimmer and apply a
drop of oil.
4. Switch the shaver on, and run it
for approximately five seconds.
5. Switch off the shaver, and wipe
off any excess oil from the outer
foils with a soft cloth.
8
Advertisement
