Table of Contents
Advertisement
User Set Up
User Setup
In the USER SETUP screen you can assign the DVR an Admin ID and an Admin Password. These are needed for access-
ing your DVR remotely. The Admin ID and Password can be up to 14 charaters long.
You can also set a USER ID and PASSWORD. This allows others to view your cameras remotely with restrictions.
The default ADMIN ID is "ADMIN".
The default PASSWORD is "111111".
1. Go to the NETWORK SETUP screen and scroll down to USER
SETUP.
2. Select Admin ID and push SELECT.
3. Use the UP and DOWN buttons to scroll through the charac-
ters and then push the SELECT button to select that character.
4. Use the LEFT and RIGHT buttons on the remote or the RWD
and FWD buttons on the front panel to move across to the
next character in your password.
5. Repeat steps 3 and 4 to change the ADMIN PASSWORD,
USER ID and USER PASSWORD.
6. Reboot the DVR for the changes to take affect.
Note:
We highly recommend you change the admin password if connecting to a network/
router as this DVR is viewable over the internet and can be easily found using
google search.
Viewing Remotely
Now that you have configured the DVR and your PC you can view your DVR over the internet. The DVR can be viewed
remotely over the internet using the DVR software on the CD included with the DVR or using a web browser (preferably
Internet Explorer).
Using Internet Explorer
1. Open up Internet Explorer. (If you do not have Internet
Explorer you can download it from the Microsoft website
http://192.168.1.100:80
www.microsoft.com.)
2. In the address bar type "HTTP://" followed by your
IP ADDRESS and a colon then your HTTP PORT. eg
"HTTP://192.168.1.100:80" and push ENTER.
See DHCP setup to find your IP address and HTTP port.
3. You will now see a login window. See LOGIN for further
instructions.
Advertisement
Table of Contents
