Adjusting The Temperatures And Display - LG MFL37933590 Owner's Manual

ADJUSTING THE TEMPERATURES
AND DISPLAY
Adjust Freezer Temperature
To adjust the temperature in the freezer
compartment, press the FREEZER button to
cycle through the the range of available settings.
Refrigerator Temperature
To adjust the temperature in the refrigerator
compartment, press the REFRIGERATOR button
to cycle through the range of available settings.
NOTE: The actual inner temperature varies
depending on the food status, since the indicated
temperature setting is the target temperature and
not the actual temperature within the refrigerator.
Initially set the REFRIGERATOR CONTROL at
37 degrees F and the FREEZER CONTROL at 0
degrees F. Leave them at these setting for 24
hours (one day) to stabilize. Then adjust the
compartment temperature as illustrated above.
w CAUTION
• With the refrigerator door open, keep pressing
the REFRIGERATOR Button and ICE PLUS
Button more than 5 seconds, then it goes to the
display mode with special beep sound.
• Perform the same way again to cancel the
display mode.
• All cooling unit will be turned off at display mode
(Exceptions: Lamp, Display).
USING YOUR REFRIGERATOR
Temperature Display
To change the temperature display from
Fahrenheit to Celsius:
• Simultaneously press and hold the FREEZER and
REFRIGERATOR buttons for more than 5
seconds
• Do the same to convert back to Fahrenheit.
Power Saving Mode
• The display will remain off until the next time the
door is opened. The display will also turn on when
any button is pressed, and it will remain on for 20
seconds after the last door opening or button
selection.
• To deactivate the Power-Saving Mode, press the
FREEZER and EXPRESS FRZ. buttons
simultaneously and hold them for 5 seconds until
the tone sounds.
NOTE: Power Saving Mode function is set on the
product.
21