Crisper Humidity Control; Removing Crisper; Modular Door Bin; Dispenser Drip Tray - LG MFL37933590 Owner's Manual

CRISPER HUMIDITY CONTROL

You can control the amount of humidity in the
moisture-sealed crispers. Store vegetables or
fruits requiring more or less humidity in separate
crispers. Adjust the control to any setting
between HIGH and LOW.
• LOW lets moist air out of the crisper for best
storage of fruits.
• HIGH keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
w w CAUTION : The glass shelf over the crisper is
not firmly secured. Be careful when tilting.

REMOVING CRISPER

1. To remove, pull the drawer out to full
extension.
2. Lift the front of the crisper up, then pull it
straight out.
3. To install, slightly tilt up the front and insert the
drawer into the frame and push it back into
place.
To remove the glass
1. Lift up the glass under the crisper cover.
2. Pull the glass up and out.
USING YOUR REFRIGERATOR
Humidity Control
High Low

MODULAR DOOR BIN

The door bins are removable for easy cleaning
and adjusting.
1. To remove the bin, simply lift the bin up and
pull straight out.
2. To replace the bin, slide it in above the desired
support button and push down until it stops.
w w WARNING : Somebody can be hurt if door
bins are not firmly assembled.
w w NOTE : DO NOT adjust a bin that is loaded
with food.
w w CAUTION : DO NOT allow children to play
with baskets. Sharp corners on baskets could
cause injury. Crispers, Door Bins and interior
shelves are not dishwasher safe.

DISPENSER DRIP TRAY

Holes
The dispenser drip tray has no self-draining
function. It should be cleaned regularly. Remove
the cover by pressing and pulling the tray. Dry it
with a cloth. To reinstall the tray, slightly tilt the
front of the tray and snap the ribs into the holes.
26
Tabs