Replacing The Oven Lamps - DeLonghi DOUBLE OVEN Instructions Manual

REPLACING THE OVEN LAMPS

WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
■ Let the oven oven cavities and the heating elements to cool down;
■
Switch off the electrical supply;
TOP RIGHT LAMP (TOP AND BOTTOM MAIN OVEN):
■
Remove the protective cover C (fig. 6.2);
■ Unscrew and replace the bulb B with a new one suitable for high tem-
peratures (300°C) having the following specifications: 230-240V 50 Hz,
E14 and same power (check watt power as stamped in the bulb
itself) of the replaced bulb.
■ Refit the protective cover;
LEFT LAMP (BOTTOM MAIN OVEN ONLY):
■ Remove the left wire rack and the side catalytic panel by unscrewing
the fixing screws.
■
Press down from the top the protective cover A (fig. 6.2) and remove
it by rotating on the lower side. IMPORTANT: never use screwdrivers
or other utensils to remove the cover A. This could damage the enamel
of the oven or the lampholder. Operate only by hands.
■ Unscrew and replace the bulb B with a new one suitable for high temperatures
(300°C) having the following specifications: 230-240V 50 Hz, E14 and same power
(check watt power as stamped in the bulb itself) of the replaced bulb.
■
Refit the protective cover A operating in reverse order. ATTENTION: the notch in the
inner edge of the cover must be oriented toward the lamp.
■
Assemble the left wire rack and the side catalytic panel with the arrow up.
Note: Oven bulb replacement is not covered by your guarantee.
1
A
44
Fig. 6.2
2
A
A
B
C
B