Getting Ready; Connecting Machine To Power Source; Installing The Snap-In Sewing Table - Silvercrest SNMD 33 A1 Operation And Safety Notes

Connecting machine to power source

Installing the snap-in sewing table

Attention:
Unplug power cord when machine is not
in use.
Attention:
Consult a qualified electrician if in doubt
as to connect machine to power source.
Unplug power cord when machine is not
A A
in use.
The foot controller (r) must be used with
the appliance by FC-2902B (220-240V
area) .
Connect the machine to a power source as
illustrated.
Sewing light
Press main switch (A) for power and light
on. (" l ")
Foot control
Foot controller (r) regulates the sewing
speed.
Keep the snap-in sewing table horizontal,
and push it in the direction of the arrow.
The inside of the snap-in sewing table can
be utilized as an accessory box.

Getting ready

GB / MT 9