Keypad Address Program Mode Display; Direct Address Program Mode Keypad Commands - NAPCO LIBRA LIB-P432EX Programming Instructions Manual

KEYPAD ADDRESS PROGRAM MODE DISPLAY

GEM-DXRP2 / GEM-DXK2 Keypads
3P
1
3C
2
GEM-DXRP3 / GEM-DXK3 Keypads
1
2
1
= ADDRESS LOCATION

DIRECT ADDRESS PROGRAM MODE KEYPAD COMMANDS

A. GEM-DXK2 (and GEM-DXRP2) Keypad
To access, press y in
Dealer Program Mode.
1. Toggle Cursor to 4-digit ad-
dress field using the w
button.
2. Enter address Number directly
using number buttons (0-9).
3. Enter Data directly using num-
ber buttons.*
4. Press the
To exit, press y.
NOTE: Press 0
*
Press G0 through G5 for 10-15, respectively.
NAPCO Security Systems
1
00003C
(Direct Entry)
BYPASS FIRE/TBL SYS TBL
INTERIOR
BYPASS FIRE/TBL SYS TBL
INTERIOR
P
3C
GEM-DXK4RF Series Keypads
2
u
button to save.
button to clear character at cursor.
Select NEXT/PRIOR Address.
Press Gp to jump to next programming block.
2
Flashing
Press
w
CHIME
address location, and (2) the corresponding
data shown.
CHIME
Press
w
address location, and (2) the corresponding
data shown.
when in Address Program Mode.
= DATA ENTRY LOCATION (Left and Right Digits)
0 0 0 0 3 C
GEM-DXK2
LIBRA LIB-P432EX Series Programming Instructions
followed by (1) the 4 digit
followed by (1) the 4 digit
Note: A long beep sounds
Page 21