Fujitsu ScanPartner 15C Installation Procedures page 5

ScanPartner15C\600C\620C\93GX\3091DC\3092DC
when finished a message box will report the number of files unzipped. Click on OK
and close WinZip.
11. In the Scandall Download folder locate the Scandall.exe file and double click.
Afterwards follow the prompts and when finish launch Scandall.
Step H: Scanning with Scandall21.
Once Scandall21 is installed it is time to start scanning.
1. Launch Scandall21 by clicking on the shortcut link on your desktop or manually by
clicking on Start, Programs, Scanner Utility for Microsoft Windows, then
Scandall21.
2. After the Untitled Screen has open, click on Scan and choose Select Source.
3. Select the Fujitsu Twain source for your scanner by Highlighting it and clicking
OK. You will only need to do this once unless you are scanning with multiple
sources.
4. Once you are back at the Untitled Screen click on Scan and select To View this
time. The Twain User Interface will popup.
5. Select the scanning parameters that you wish to use – Color mode, resolution,
paper size, etc...
6. Next under Scan Type choose either ADF or Flatbed in the dropdown box.
7. Place your document in the ADF or on the Flatbed face down and click on the Scan
button.
8. After the document is scanned close the Twain User Interface and the image will
appear on the Untitled Screen.
Congratulations! You have successfully completed your scanner installation.
*If you do not have any unzipping software installed on your system, you can download a free
evaluation copy at www.winzip.com
Win95\98\ME Installation Procedure
Rev050404A