Packing Instruction - McIntosh MA7000 Owner's Manual

Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. Four 1/4 - 20x2-1/4
inch screws and washers must be used to fasten the unit
securely to the bottom pad and wood skid. This will ensure
the proper equipment location on the bottom pad. Failure
to do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please
call or write Customer Service Department of McIntosh
Laboratory. Refer to page 3. Please see the Part List for the
correct part numbers.
Quantity Part Number
1 034052
1 034051
2 034054
2 034186
2 034187
1 034136
1 034137
1 034188
1 034264
4 401212
4 104058
Packing Instructions
Description
Shipping carton top
Shipping carton bottom
Foam Pad (top and bottom)
Foam Pad (front and rear)
Foam Pad (sides)
Inner carton top
Inner carton bottom
Foam Pad (inner carton)
Shipping skid
1/4 - 20x2-1/4 cap screw
Flat washer
19