Siemens CCMS2010-IRW User Manual page 35

Siemens AB
Security Products
Use PPPoE
For the PPPoE users, enter the PPPoE Username and Password into the fields,
and click on the <Save> button to complete the setting.
Advanced
 Web Server port
The default web server port is 80. Once the port is changed, the user must be noti-
fied the change for the connection to be successful. For instance, when the admin-
istrator changes the web server port of the IP Camera whose IP address is
192.168.0.10 from 80 to 8080, the user must type in the web browser
"http://192.168.0.10:8080" instead of "http://192.168.0.10".
 RTSP port
The default setting of RTSP Port is 554; the setting range is from 1024 to 65535.
the command line to get the different video stream are
H.264-1: rtsp://ipaddress/h264
H.264-2: rtsp://ipaddress/h264_2
H.264-3: rtsp://ipaddress/h264_3
H.264-4: rtsp://ipaddress/h264_4
MJPEG: rtsp://ipaddress/jpeg
Please note that the stream needs to be available in the web page configuration.
 MJPEG over HTTP port
The default setting of MJPEG over HTTP Port is 8008; the setting range is from
1024 to 65535.
 HTTPS port
The default setting of HTTPS Port is 443; the setting range is from 1024 to 65535.
NOTE: Be aware to choose the different port from the one set for the web server
port.
IPv6 Address Configuration
With IPv6 support, users can use the corresponding IPv6 address for browsing.
Enable IPv6 by checking the box and click on <Save> to complete the setting.
QoS
The QoS (Quality of Service) setting can be found under this path: System> Net-
work> QoS.
QoS allows providing differentiated service levels for different types of traffic pack-
ets, which guarantees delivery of priority services especially when network con-
gestion occurs. Adapting the Differentiated Services (DiffServ) model, traffic flows
are classified and marked with DSCP (DiffServ Codepoint) values, and thus re-
ceive the corresponding forwarding treatment from DiffServ capable routers.
DSCP Settings
The DSCP value range is from 0 to 63. The default DSCP value is 0, which means
DSCP is disabled. The IP Camera uses the following QoS Classes: Video, Audio
and Management.

Video DSCP
The class consists of applications such as MJPEG over HTTP, RTP/RTSP and
RTSP/HTTP.
 Audio DSCP
Camera settings
35
05.2014