Razor E250A User Manual page 5

push down the handlebar to the location shown in figure <3>. Lock the quick
release lever to the original position shown in figure <1>.
3. Hold the handlebar grips with both hands and press the left and right buttons (in
the red circle) down firmly as shown in figure <4>. The button is located
underneath the rubber handle bar grips. While continuing to press the handle grip
release buttons, pull out the handlebar grips according to the arrow direction shown
in figure <4> and then fold them downward. The handle grips will be folded as
shown in picture (B).
4. Push the handlebar forward slightly to release tension on the folding mechanism
and at the same time press the silver folding lever according to the direction shown
in Figure <6>, then fold the handlebar down to the position shown in picture C.
b. Unfold
1. Push the silver folding lever according to the direction shown in figure <7> and
then lift the handlebar forward until the hook plate of the folding mechanism securely
locks into place.
2. Lift the handlebar grips according to the arrow direction shown in figure <8>.
The handle grips will lock into place automatically.
3. Push the quick release lever according to the arrow direction shown in figure <9>.
Raise the handlebar height to either of the two handlebar height limiting holes shown
in figure <10>. Once the handlebar height limiting hole locks into place, lock the
quick release lever securely to the position shown in figure <9>.