LevelOne FCS-1141 User Manual page 37

H.264 1.3-megapixel poe network camera

Hide thumbs Also See for FCS-1141:

Table of Contents

• Enable Alarm Output

Select the item to enable alarm relay output.

• Send Alarm Message by FTP/E-Mail

The Administrator can select whether to send an alarm message by FTP

and/or E-Mail when an alarm is triggered.

• Upload Image by FTP

Select this item, and the Administrator can assign a FTP site and

configure various parameters as shown in the figure below. When the

alarm is triggered, event images will be uploaded to the appointed FTP

site.

• Record Stream to SD Card

Select the item, and the alarm-triggered recording will be saved into your

Micro SD card.

Table of Contents