•
•
30
NOTE: To enable this function, please make sure the UPnP
component is installed on your computer. Please refer to
Appendix E: Install UPnP Components for UPnP component
installation procedure.
Enable UPnP port forwarding
When the UPnP port forwarding is enabled, the IP Camera is allowed to
open the web server port on the router automatically.
NOTE: To enable this function, please make sure that your
router supports UPnP and it is activated.
Friendly name
Set the name for the IP Camera for identity.
FCS-1131
FCS-1131
FCS-1141
FCS-3071