Table of Contents
Advertisement
Additionally, users can change the IP Camera's network property, either DHCP
or Static IP directly in the device finding list. Refer to the following section for
changing the IP Camera's network property.
Example of Changing IP Camera's Network Property
Users can directly change an IP Camera's network property, ex. from static IP
to DHCP, in the finding device list. The way to change the IP Camera's network
property is specified below:
Step 1: In the finding device list, click on the IP Camera that you would like to
Step 2: The "Network Setup" page will come out. Select "DHCP," and press
12
The default login ID and password for the Administrator are:
Login ID
root
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator's password be
altered for the security concerns. Refer to section
Security
change its network property. On the selected item, right click and select
"Network Setup." Meanwhile, record the IP Camera's MAC address, for
future identification.
"Apply" button down the page.
Password
for further details.
4.3.2
Advertisement
Table of Contents
