Changing The Duration Of The On Screen Menu (Osm) Timeout - NCS Technologies Cirrus LT TZ-241G User Manual

Changing the Duration of the On Screen Menu (OSM) Timeout

There are two ways to set the OSM Timeout interval. The first way can be set
within the OSM itself, under Power Management > Power Settings > OSM Time-
out. The second way is via Teradici's Firmware Menu.
Note: You may change the duration of the timeout with either option. However,
please note that if the OSM 'Menu Display Timeout' Menu and the Teradici
'OSM Screen Saver Timeout' Menu are set to different intervals, the Cirrus LT
will automatically use the lowest selected interval.
Option 1: Via the OSM Power Management > Power Settings > OSM Timeout
To change the timeout duration via the On Screen Menu Timeout:
1.
62
Click the Power Management Submenu, then click the OSM Timeout bar,
as shown below.
Cirrus LT User Manual-1.2d-062515