11.
Go back to the Devices Tab. Under the Last Operation Column, confirm the
selected device's status displays the "apply_certificate successful" message,
as shown below.
Note: If you are unsuccessful, go back to Step #6 and try again.
12.
You may also want to verify that the certificate was successfully applied to the
selected devices on the Cirrus LT Console. In order to do this, Press <FN+F10>
to bring up the Onscreen Menu (OSM) and go to Administrator, and click on
Certificates Info, as shown below.
Cirrus LT User Manual-1.2d-062515
a.
103