NCS Technologies Cirrus LT TZ-241G User Manual page 29

2. Lift the notebook out of the Docking Station.
Note: The notebook and Docking Station use different AC adapters. Make sure
you are using the 90 Watt Adapter (19V - 4.74A) with the Docking Station.
While the notebook is docked in the Docking Station, the dedicated USB key-
board and mouse ports will not work and these ports are active in the Docking
Station only. These ports are labeled with an icon of a mouse and a keyboard.
However, the two PCoIP and charging ports on the notebook will still work
giving you a total of 6 working USB Ports when using the Docking Station and
two charging USB Ports.
Hot-docking (placing the Cirrus LT on the Docking Station while the Cirrus LT
has power) the Cirrus LT is technically not supported, but will work in most
situations. USB devices inserted in the PCoIP ports on the Docking Station will
not work after a hot-dock event. You must either dock when the Cirrus LT is off
or restart Cirrus LT for these devices to function after docking.
Cirrus LT User Manual-1.2d-062515 29