NCS Technologies Cirrus LT TZ-241G User Manual page 67

Enable in Session
Enabling this mode will put the unit to sleep within the selected amount of time
of inactivity even if in a remote session.
To Enable In Session Mode:
1.
2.
To Disable In Session Mode:
1.
2.
Cirrus LT User Manual-1.2d-062515
Click the Power Management Submenu.
Click the box next to Enable In Session. When the green 'check mark' is
selected, Enable In Session Mode will then be turned on.
Click the Power Management Submenu.
Click the box next to Enable In Session. When the gray 'x' is selected, En-
able In Session Mode will be turned off.
67