Chapter 4: Navigating The On Screen Menu; On Screen Menu (Osm) Structure - NCS Technologies Cirrus LT User Manual

Hide thumbs Also See for Cirrus LT:

Table of Contents

Chapter 4: Navigating the On Screen Menu

Use the On Screen Menu (OSM) to configure various parameters on your Cirrus LT. To in-

voke the OSM you press Fn-F10. You can navigate through the OSM with the touchpad or

with an external mouse connected to the shared USB mouse port located on the right side

of your notebook.

When using an external USB keyboard that is connected to the dedicated USB keyboard

port (on the right side of the notebook) you can also invoke the OSM by pressing SHIFT-

F10. This is handy when using the notebook along with a Docking Station and the note-

book lid is closed because you are using external monitors, keyboard and mouse. Since

most external keyboards do not have a function key, pressing SHIFT-F10 will bring up the

OSM for your convenience.

The On Screen Menu (OSM ) is based on a tree structure moving from left to right

as you drill deeper into the menu system. Each level of the tree will have a title and

various options to choose from; either click an option to move down the tree or to

make a selection with the mouse pointer. You can also click any option higher in the

tree structure to select that menu. Finally, to exit the OSM either click the X on the

bottom left corner of the menu or press Fn-F10 again.

Note: When you open the OSM, a second cursor will appear. This cursor operates

within the OSM only. When you close the OSM, the cursor will disappear.

Note: As you are clicking through the settings in the OSM, you will not have to

"confirm" any changes except in critical situations such as shutting down the

notebook or changing your password. All other changes will save automatically.

Cirrus LT User Manual-1.2-041715

Table of Contents