APPENDIX
How to Check/Configure Network Adapter's IP Address in
Windows 98/ME/2000/XP
To connect to a network, make sure the proper
network settings are configured for the wireless
adapter.
For Microsoft Windows XP:
From the desktop, right click on My Network
Places > select Properties > Double-click on
the Realtek Wireless Network Connection.
Click Internet Protocol (TCP/IP)
Click Properties
Select Obtain an IP address
automatically (if the Wireless
Router or Access Point has
DHCP server feature enabled)
Select Obtain DNS server
address automatically
Click OK
<Important>
If your network's "Wireless Access Point" or "Wireless Router"
has DHCP Server feature, for ease of configuration, please
enable the feature, and set the wireless adapter to "Obtain IP
Automatically". After the wireless adapter connects to the
Access Point or Router, it will receive the IP addresses
automatically.
Page 8
English