TRENDnet TEW-226PC Quick Installation Manual page 6

If the available network's WEP is "No" (no encryption), click on its SSID and
click "Connect" to connect to this network.
If the network's WEP is "Yes", after clicking "Connect", manually enter the
"Security" information, and click "Apply".
• Network Mode: select "Infrastructure" when connecting to an "Access
Point" or "Wireless Router". Select "802.11 Ad-Hoc for peer-to-peer
(computer-to-computer) connection.
• Network SSID: this is the wireless network's name. To make the
connection, the wireless devices in the same network need to have the
same SSID.
• Channel: Available in "802.11 Ad-Hoc" mode only. Wireless devices in
the same network need to use the same channel number.
• Enable Encryption: check this box to enable the encryption.
• Format: select the encryption format in "ASCII" or "HEX" (hexadecimal).
• Key Length: select the encryption key length.
40/64-bit:
128-bit:
ASCII: 5 alphanumeric characters, any combination of
numbers 0 ~ 9 and letters a ~ z (upper and/or lower case).
Hex: 10 characters, with any combination of numbers 0 ~
9 and letters a ~ f (upper or lower case).
ASCII: 13 alphanumeric characters, any combination of
numbers 0 ~ 9 and letters a ~ z (upper and/or lower case).
Page 6
English