Technical Support - TRENDnet TEW-226PC Quick Installation Manual

Static IP address Setup
Select Specify an IP Address (if
you don't have a DHCP server in
the network)
Input IP address and Subnet mask
Check Detect connection to network
media
Click OK
Checking the Adapter's IP Address
Windows 2000/XP: go to "start", select "run", type in cmd and click ok. At
the command prompt (C:\), type in ipconfig/all and hit "Enter".
Windows 98/ME: go to "Start", select "Run", type in winipcfg and click
"OK". From the drop-down menu, select the name of the network adapter
(not the PPP Adapter).
Ping Command: If you know a networked device's IP address, in the
command prompt (c:\), type in ping xxx.xxx.xxx.xxx (where
xxx.xxx.xxx.xxx is the device's IP address) and hit "Enter". If you see
replies from this IP address, your computer should be able to communicate
with this device.
You can find the most recent driver/firmware/software and user
documentations on the TRENDware website. TRENDware provides
free technical support for all customers for the duration of the
warranty period on this product.
Monday ~ Friday, 7:30AM ~ 6:00PM Pacific Standard Time

Technical Support

TRENDware Technical Support
Tel: +1-310-891-1100
Fax: +1-310-8911111
E-mail: support@trendware.com
www.trendnet.com
(except holidays)
Page 11
English