Contents Environmental protection The packaging material can be recy- General information cled. Please do not place the packag- Safety instructions ing into the ordinary refuse for disposal, but arrange for the proper Operation recycling. Maintenance and care Old appliances contain valuable ma- terials that can be recycled.
Never draw in fluids containing solvents Safety instructions or undiluted acids and solvents! This in- cludes petrol, paint thinner and heating Danger oil. The spray mist thus generated is Never touch the mains plug and the highly inflammable, explosive and poi- socket with wet hands.
Caution Operation Do not operate the appliance at temper- atures below 0 °C. Description of the Appliance Observe a distance of at least 30 cm when using the jet to clean painted sur- The scope of delivery of your appliance is il- faces to avoid damaging paintwork.
Water supply Operation According to the applicable regula- Danger tions, the appliance must never be The trigger gun is subjected to a recoil force used on the drinking water net with- when the water jet is discharged. Make out a system separator. Use a suitable sys- sure that you have a firm footing and are tem separator as per EN 12729 type BA.
Maintenance and care Interrupting operation Release the lever on the trigger gun. Danger Lock the lever on the trigger gun. Turn off the appliance and remove the During longer breaks (more than 5 min- mains plug prior to any care and mainte- utes), also turn the appliance off using nance work.
Appliance is not running Troubleshooting Pull on the lever of the trigger gun; the You can rectify minor faults yourself with device will switch on. the help of the following overview. Check whether the voltage indicated on If in doubt, please consult the authorized the type plate corresponds to the volt- customer service.
Technical specifications Power connection Voltage 220-240 1~50/60 Power consumption Mains fuse (slow-blow) 10 A Protective class Protection class IP X5 Water connection Max. feed temperature 40 °C Min. feed volume 8 I/min Feed pressure 0,2-1,2 MPa Performance data Working pressure 8 MPa Max.