Maintenance And Cleaning - KitchenAid KRDD 9010 Instructions For Use Manual

501971102019_IFU_UK:Layout 1
Using the product
Appliance's alarms
Open drawer alarm (upper draw only).
The acoustic alarm will activate when the upper
drawer has been left open.
Pressing the Acoustic Alarm button (6), will silence
the alarm.
To completely deactivate the drawer open alarm,
close the refrigerator drawer.
Temperature alarm
An increase in temperature inside the appliance,
over +15°C, with the drawers closed, will cause
the alarm to sound and a red warning LED (5) to
flash.

Maintenance and cleaning

Before carrying out any cleaning or maintenance operation, switch the product off by pressing
button (1) on the control panel for 3 seconds, then unplug the appliance or disconnect it from
the power supply.
Cleaning the refrigerator
Refrigerator defrosting is completely automatic. Droplets of water on the back wall behind the drawer,
indicate that the automatic defrost phase is in progress. The defrost water is automatically run into a drain
hole and collected in a container, where it evaporates
Clean the defrost water drain hole regularly using the tool supplied, in order to ensure the constant and
correct flow of defrost water.
Important:
• The vertical glass separators inside the drawers are part of the structure and should not be removed.
• The drawers sliding guides are coated with a food compatible lubricant which helps opening and
closing. Never remove the lubricant and ensure that no foreign objects fall on the sliding guides,
preventing them from operating correctly.
Cleaning the appliance:
1. Press the button (1) on the control panel for 3 seconds.
2. Empty the drawer.
3. Remove all food and beverages accessories.
4. Clean the refrigerator drawers with a sponge soaked in a solution of lukewarm water and/or mild
detergent. Do not use abrasive substances or tools.
5. Rinse and dry with a soft cloth.
6. Replace the accessories.
7. Press the button (1) again for 3 seconds to restore the refrigerator operation.
7-01-2008 13:58 Pagina 8
(continuation)
Pressing the Acoustic Alarm button (6), the alarm
sound will silence, but the LED will continue
flashing until the temperature decreases to the
correct conservation temperature.
Antibacterial filter alarm
If on opening the drawer, the letters "AF" appear
on the display (2), the antibacterial filter needs
replacing (see section "Maintenance and cleaning").
To deactivate this alarm press the Acoustic Alarm
button (6) for 5 seconds.
8