CONTENTS DESCRIPTION PAGE 12 BEFORE USING THE GLASS CERAMIC HOB PAGE 13 PRECAUTIONS AND USEFUL SUGGESTIONS PAGE 14 HOW TO USE YOUR GLASS CERAMIC HOB PAGE 15 HOW TO USE THE DUAL COOKING ZONE PAGE 15 COOKING HINTS PAGE 16 ENERGY SAVING HINTS PAGE 17 HOW TO CLEAN THE GLASS CERAMIC HOB...
BEFORE USING THE HOB To make the most of your hob, please read Environmental hints these instructions carefully before use. Keep Packing them for future reference. Do not throw the packing into the garbage: Please ensure that the glass of the hob is not first sort out the different materials (i.e.: steel, broken and/or cracked.
PRECAUTIONS AND USEFUL SUGGESTIONS The Manufacturer cannot be held responsible for damages derived from improper, wrong and unreasonable use. (i.e. heating rooms). The use of electric household appliances requi- res observation of several fundamental rules. The glass ceramic hob has a good mechanical strength and can withstand small accidents, misuse;...
HOW TO USE YOUR GLASS CERAMIC HOB The cooking zones are clearly marked on the hob surface. The switching on, adjustment and switching off of the cooking zones are controlled by turning the knobs situated on the oven clockwise. These knobs are marked 0 to 6 or 0 to 11. Each number corresponds to a cooking power.
ENERGY SAVING HINTS The bottom of pans must be the same or sli- ghtly greater than that of the cooking zone - never smaller. Only use pans with a thick flat base. Possilby use a cover. You can set a lower power and save energy.
HOW TO INSTALL THE GLASS CERAMIC HOB ( FOR THE QUALIFIED TECHNICIAN) IMPORTANT HINTS This appliance conforms to EEC directive 87/308/EEC on radiointerference. It belongs to Class Y against fire-risks and may be installed near a column. Conformity declaration This appliance incorporates parts inten- ded to come into contact with foodstuffs in compliance with EEC directive 89/109/CEE.
HOW TO INSTALL THE GLASS CERAMIC HOB Assembly Make an opening in the worktop, following the dimension (in mm) shown in the illustra- tion. Prior to installing the hob, treat the opening of the worktop with an hydrorepulsive mate- rial (i.e.: silicone). To facilitate the cutting operations, a templa- te is available by Service (Code N.
TECHNICAL DATA Power of the cooking zones 230 V AKM 605 Power W 1. Dual zone radiant plate Ø 210x120 2100 (inner 700 - outer 1400) 2. Oval radiant plate Ø 145x250 1800 (inner 1000 - outer 800) 3. Haloring plate Ø 145 1200 4.
Need help?
Do you have a question about the AKM 605 and is the answer not in the manual?
Questions and answers