Jack Lananne's Power Juicer Elite Operating Manual page 9

Assembly
DOWNWARD POSITION
Main Unit
UPRIGHT POSITION
STEP
Lock lid into place by lifting locking
bar up until it clicks into grooves located
on both sides of the lid.
Make sure locking bar is in the full
upright, locked position.
IMPORTANT: The unit will not start until this bar
is properly locked in place.
STEP
Insert pusher into chute. Always use
pusher to feed fruits and vegetables
into unit. Push gently, never force.
The blade will do the work.
WARNING:
CHERRIES MAKE SURE THE POWER
IS OFF AND BLADE HAS STOPPED
SPINNING BEFORE REMOVING
THE PUSHER FROM
THE CHUTE.
Assembly/Main Unit
POWER JUICER ELITE
Note: Refer to page
6 for all part names.
7:
STEP
Make sure juice spout is
in the downward position.
If the juice spout is left
in the upright position
the juice will not flow.
It will stay in the receptacle
and may overflow from the
sides.
8:
9:
WHEN JUICING
9