Assembly
Main Unit
Note: Refer to page
6 for all part names.
1
STEP
:
WARNING:
power cord into an electrical outlet
before unit is fully assembled
Place base on a dry flat surface with
locking bar in down position on
the spout side in front of the
machine (as shown).
2
STEP
:
Place receptacle on the base, with
juicer spout facing the same direction
as locking bar. Settle receptacle
into alignment.
3
STEP
:
Place filter inside receptacle,
matching the opening on its
bottom to the screw peg
connected to the base.
Assembly/Main Unit
POWER JUICER ELITE
Never plug the
.
7