Oricom PMR1000R Manual page 5

Your Oricom PMR1000R radio display
Changing the faceplates Changing the faceplates
Your Oricom PMR1000R radio display
Additional coloured faceplates
Your radios are supplied with additional coloured faceplates, which you can change
Keypad lock
as required.
Scan
Removing the faceplate
Rodger beep
Battery level
1. Carefully lever the faceplate out of the fixing at
Position 1
positon 1 using a screwdriver.
2. You can then release the whole faceplate from
the radio quite easily.
CTCSS code
Fixing the faceplate
1. Take the new faceplate and place it on the radio.
2. Then clip the faceplate into place.
Duplex mode
Hi power
VOX
Channel
4 19