Oricom PMR1200 Manual page 17

Call alert
Your radio can alert you to incoming signal by emitting an audible
call tone.
Call-Ring tone
You can send a Call-ring tone to other radio users to give
an alert that you want to communicate with them.
Press the CALL button
You will hear a ring tone for about two seconds; "TX" icon
appears on the LCD screen. Any other units within the
transmitting range and tuned to the same channel and sub-
channel (if applicable) will hear the Call-ring tone.
Selecting a Call- Ring tone
Your PMR1200 is equipped with 10 different types of Call-Ring
tones.
a. Press the MENU button 8 times, the "C A" icon will
b. Press the UP or DOWN button to select the desired Call-
c. Press the PTT button to confirm your setting.
Setting the Roger Beep
The Roger beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving party
to inform you that you have intentionally ended the transmission,
and you are now in receive mode.
a. Press the MENU button 9 times, the "ON" icon will flash
b. Press the UP or DOWN button to select the Roger beep
c. Press the PTT button to confirm your setting.
display and flash on the LCD Screen.
ring tone. A respective Call- Ring tone sound will be
played when changing from one tone to another.
on the LCD Screen.
On/Off.
Operation
17